CRYSTAL 6000 – Covering and Drossing-Off Flux

CRYSTAL 6000 – Covering and Drossing-Off Flux

By

CRYSTAL 6000 is a granulated flux characterized by complete absence of dust, very low percentage of use and dry slag. In respect of the working environment and emissions, the CRYSTAL 6000 product represents a concrete and effective response to the problem of the use of powdered products during the treatment of metal in ladles, in … Continued

FLOTAB 10 – Tablets for Cleaning Action

By

Flotab 10 tablets for cleaning and deoxidising action over molten aluminium alloys contained in reverberatory furnaces. This product has been especially formulated to obtain an effective reduction in the formation of oxides and drosses that normally adhere on refractory walls. Flotab 10 avoids the risk of hard inclusions and formations of Corundum. The tablets reduce … Continued

CRYSTAL 2600 – Drossing in Granular Form

By

Crystal 2600 is produced in granular form and has an improved formulation to perform effective covering and drossing on molten aluminium alloys. The product is normally recommended for melts standing in melting furnace, in transport ladles or during rotor degassing in ladles and crucibles. The formulation is based on inorganic and natural blended salts. This … Continued

ALUCLEAN 18 – Covering and Drossing-Off Flux

By

Aluclean 18 is a covering and drossing-off flux to be used in melting and holding furnaces for aluminium alloys. During melting operation the cover flux protects the molten charge from the oxidizing furnace flames. Aluclean 18 reduces oxide inclusions formation in liquid metal. When used as drossing-off flux, Aluclean 18 must be stir into the … Continued

ELIDRON 201 – Degassing Treatments of all Aluminium Alloys

By

Elidron 201 releases Nitrogen gas which is useful for washing and degassing the molten alloy. Nitrogen gas removes hydrogen entrapped by the metal during melting operations and brings to bath surface all oxides, micro-oxides and impurities. Elidron 201 tablets have a combined effect. The tablets, dissolved by metal temperature, release nitrogen gas capable to remove … Continued

ALUXAL 267 – Flux for Sodium Addition

By

Aluxal 267 is a high quality flux, in powder form, for sodium addition into Al-Si alloys with silicon content ranging between 7-13%. Modification treatment alters the silicon structure of the alloy and improves castings mechanical properties. The silicon structure changes from coarse, angular, acicular crystals into fine, rounded, interconnected fibrous particles, perfectly distributed in the … Continued

FLOTAB 5 – Sodium Modifier

By

In gravity and sand foundries, eutectic aluminium silicon alloys (Silicon 7-13%) should normally be treated with sodium fluxes to modify the silicon structure and improve mechanical characteristics. After treating the alloys with products such as Crystal 2007/M, Napal 700 or Nabox: it is important to use Flotab 5 to keep the desired amount of sodium … Continued

CRYSTAL 2007/M – Flux for Sodium Addition

By

Crystal 2007/M is a high quality flux, in granular form, for sodium addition into Al-Si alloys with silicon content ranging between 7-13%. Modification treatment alters the silicon structure of the alloy and improves castings mechanical properties. The silicon structure changes from coarse, angular, acicular crystals into fine, rounded, interconnected fibrous particles, perfectly distributed in the … Continued

AlTiB – Alloy Degassing

By

AlTiB – Alloy Degassing Aluminium Titanium 5% Boron 1% is a solid metal rod, available in cutted rod or coils, used in aluminium cast-houses foundries or billets casting plants to aid nucleation and grain refining of aluminium alloys. AlTiB must be added in the liquid aluminium alloys at temperatures ranging from 680 up to 780°C. … Continued

CRYSTAL 2000 – Covering and Drossing-Off Flux

By

Crystal 2000: covering and drossing-off flux characterized by the absence of toxic and harmful chemicals, complete absence of dust and very low employment rate. Crystal 2000 overcomes the problems associated with the traditional powder fluxes by making handling and charging easier and safer. Also eliminates losses from furnace emissions. As result, dosage is reduced and … Continued