Metalcote 1076 – Insulating Dressing

Metalcote 1076 is a high quality insulating dressing used for total protection of refractories, castable materials or metal tools in contact with molten Aluminium (Launders, spouts, ladles and tundishes of billet casting machines). Metalcote 1076 is recommended to avoid Aluminium contamination, iron pick-up or inclusions of refractory particles into liquid metal. Packaging and storage 40 … Continued

Metalcote 77/1 – Primer for Insulating Steel Dies

Metalcote 77/1 is a special semi-insulating product recommended for coating dies of low-pressure and gravity permanent mold. Metalcote 77/1 contains fine ingredients and is capable not to alter the thermal conductivity value of the final surface dressing in contact with liquid metal. Metalcote 77/1 is widely used by foundries producing automobile or bikes wheels and … Continued

Newcote 3450 – Water Based Boron Nitride Inorganic Coating

Newcote 3450 is a water based boron nitride inorganic coating, chemically inert, not wetted by molten Aluminium alloys. The product is suitable for the protection of ceramic or metallic substrates. Newcote 3450 is especially suitable for protecting launders and hot top ceramics components in billet casting machines, concast tips or hot top rings and nozzle. … Continued

Metkote 101 – Protective Coating

Metkote 101 is a new protective agent formulated with tixotropic elements to be diluted in water and applied on refractory insulating linings or metal surfaces in contact with molten aluminium alloys. Ideal for the protection of cast iron pouring ladles, skimmers, degassing lances, launders, iron crucibles, filter boxes and ingot moulds. Dross press heads and … Continued

Firecote 1225 – Protective Coating

Firecote 1225 is a protective coating in fluid form. The product contains high purity zirconium and performs as a protective layer over ceramic surfaces, against molten aluminium erosion. It is applied on ceramic, refractory, ferrous, metallic substrates. Firecote 1225 adheres strongly to most dense ceramic castables and insulating materials used in aluminium cast houses and … Continued

Metalcote 4516 – Insulating Die Dressing

Metalcote 4516, is a “medium fine” surface finish insulating dressing, for dies used in gravity casting process of aluminium alloys. Metalcote 4516 is suitable for production of small and medium size castings. The product has strong adhesivity and is widely used for large production volumes. It helps directional solidification, slowing down the cooling effect of … Continued

Newcote 4200 – Boron Nitride Based Coating

Newcote 4200 is a boron nitride based coating enriched with a special binder resistant to high temperatures and to the action of the liquid metal. It is studied to be applied with brush or spray gun. Newcote 4200 is recommended for porous and non-porous surfaces, insulation ceramic materials in the casting of aluminum alloys that … Continued

Newcote Al 29 – Base Coating on Steel Dies

Newcote Al 29 is an insulating product recommended for coating dies of low-pressure and gravity permanent mold. Newcote Al 29 contains highly insulating minerals and is studied to resist to thermal shocks and abrasion deterioration during production cycles. Newcote Al 29 is widely used by foundries producing automobile and houseware components. Newcote Al 29 is … Continued

Metalcote 1995 – Protective Coating

Metalcote 1995 is a special coating used for protection of cast iron and steel tools in contact with molten Aluminium. Most common application is for protecting pouring ladles in pressure or gravity die castings foundries. Metalcote 1995 is recommended to avoid erosion activity of Aluminium and iron pick-up in the composition of the alloy. The … Continued

Newcote Al 227 – Insulating Die Dressing

Newcote AL 227 is a new insulating dressing used in aluminium gravity and low pressure aluminium foundries. This product is especially developed for application on critical die areas where maximum flowability of molten aluminium and heat insulation are required. Areas such as the complete mold cavities and gates must be coated with Newcote AL 227, … Continued